S Y S T E M S O L U T I O N T O P O L O G I E S
SST-SBSC
3632T
he Crown SST-SBSC 3632T is a custom
three-channel crossover network with CD-
horn equalization and summed low-
frequency output specifically designed for use
with JBL model 3632T ScreenArray® cinema
speaker systems installed in cinemas, studio
production and post-production environments.
T
SST (System Solution Topologies) modules
install into the back of Crown SST-compatible
amplifiers, saving rack space and simplifying
system wiring.
For more details about the Crown SST-SBSC
3632T, contact Crown Technical Support
at 800-342-6939 or 574-294-8200. Also,
visit the Crown Audio website at
Features
•
•
•
High-quality crossover and CD-horn EQ
module designed specifically for use with JBL
model 3632T ScreenArray® cinema speaker
systems
•
SST modules install into the back of your ampli-
fier, saving rack space and simplifying system
wiring
Neutrik® Combo jacks for balanced input con-
nection
Specifications
Performance
Frequency Response: See graph.
Signal to Noise (A-Weighted): Better than 85
dB below rated power.
Input Impedance: 20 k ohms balanced, 10 k
ohms unbalanced.
•
•
•
High-frequency (HF) signals are internally
routed to the Channel 2 amplifier input, and
mid-frequency (MF) signals are routed to the
Channel 1 amplifier input
Removable terminal block jacks for balanced
output to other components
SST Modules add flexibility by allowing you to
tailor your Crown Contractor (CH/CL) Series or
CE Series amplifier to your application
Low-frequency (LF) signals are routed from
Output B to an external amplifier
Output Impedance: 600 ohms balanced.
Total Harmonic Distortion (THD): 1 kHz rated
power, less than 0.1% THD.
Crosstalk: > 50 dB from 20 Hz to 20 kHz.
Maximum Output: +18 dB into 600 ohms.
System Block Diagram
Connectors
Input: Neutrik® Combo jacks.
DETAIL SHOWING NO CENTER GROUND CONNECTION
Output: Removable balanced terminal block.
Frequency Response
Crown’s Three-Year, No-Fault, Fully Transferable Warranty
Crown International
1718 W. Mishawaka Rd.
Elkhart, IN 46517-9439
TEL: 574-294-8200
FAX: 574-294-8FAX
Crown offers a Three-Year, No-Fault, Fully Transferable Warranty for every new Crown amplifier
product—an unsurpassed industry standard. With this unprecedented No-Fault protection, your
new Crown amplifier product is warranted to meet or exceed original specifications for the first
three years of ownership. During this time, if your unit fails, or does not perform to original
specifications, it will be repaired or replaced at our expense. About the only things not covered
by this warranty are those losses normally covered by insurance and those caused by intentional
abuse. And the coverage is transferable, should you sell your unit.
Specifications subject to change without prior notice. Latest
See your authorized Crown dealer for full warranty disclosure and details. For customers outside
of the USA, please contact your authorized Crown distributor for warranty information or call
574-294-8200.
Crown and Crown Audio are registered trademarks of Crown
International. Other trademarks are the property of their respective
owners. Printed in U.S.A.
© 2005 Crown Audio®, Inc.
7/05
132289-5B
|