Dynex Microphone DX USBMIC 13 User Manual

QUICK SETUP GUIDE  
DX-USBMIC 13 | USB microphone  
Package contents  
USB Microphone  
Quick Setup Guide  
Installing your microphone  
Plug the USB connector into an available external USB port on  
your computer or laptop. On most computers, drivers install  
automatically and your microphone will be ready to use.  
Note: On Windows, if you are prompted with the Add New Hardware Wizard,  
follow the steps to download and install the driver. This microphone is also Mac™ compatible.  
Adjusting the volume  
You can adjust the volume by turning the volume knob on the microphone.  
OR  
Your computer may also have volume controls in the operating system or within software that  
uses the microphone.  
Troubleshooting  
If your computer or recipient is not picking up audio from the microphone, attempt the  
following fixes:  
Check the volume levels of your computer's speakers.  
Check if your computer's speakers are muted either in the operating system or on the  
speakers themselves.  
Check your operating system's audio input settings.  
Check the microphone's volume and on/off settings.  
Restart computer.  
Note: If you cannot find your operating system's audio settings, refer to your computer's manual.  
Legal notices  
FCC Part 15  
This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part  
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in  
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not  
installed and used in accordance with the instruction, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in a particular installation. If  
this equipment does cause harmful interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of  
the following measure  
Reorient of relocate the receiving antenna  
Increase the separation between the equipment and receiver  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected  
Consult the dealer or an experienced radio/TV technician for help  
Changes or modifications not expressly approved by the party responsible for compliance could void the  
user’s authority to operate the equipment.  
Canada ICES-003  
This Class B digital apparatus complies with Canadian ICES-003.  
One-year limited warranty  
Contact Dynex:  
For customer service call 1-800-305-2204  
© 2012 BBY Solutions, Inc. All Rights Reserved.  
DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their  
respective owners.  
 
ENGLISH 12-0672  

Cisco Systems Network Router 10720 User Manual
Conair Electric Shaver GMT170ECS User Manual
Cradlepoint Cell Phone Accessories PS6PMCW User Manual
Craftsman Air Compressor 919167242 User Manual
Creative Labs Car Speaker M450 User Manual
Creative Security Camera 930 Slim User Manual
Dynex Network Router DX NRUTER User Manual
Fisher Price Motorized Toy Car 73517 User Manual
Fundex Games Games 8360 02 20 User Manual
GE Ventilation Hood CV936 User Manual