To play from the connected device:
1
On the TV or home theater receiver, select the video input source for the video jack you connected your selector switch to. For information about
selecting a video input source, see the documentation that came with the TV or home theater receiver.
2
Press the input selector selector button on the front of your selector switch that corresponds to the jacks the device you want to use is connected
to. AV 1 corresponds to INPUT 1, AV 2 corresponds to INPUT 2, AV 3 corresponds to INPUT 3, and AV 4 corresponds to INPUT 4.
Input selector buttons
Connect a composite video device
DX-VS201A
S-Video Audio/Video Selector Switch
Your S-Video Audio/Video Selector Switch lets you connect four video devices (such as a cable box, satellite receiver, DVD player, VCR, or game
system) to a TV or home theater receiver that has only one S-Video jack or composite (RCA-type) video jack. Your selector switch acts as a
signal splitter to send composite and S-Video signals and analog stereo audio to two destinations, such as a TV and VCR or two TVs.
Package contents
A/V Selector Switch
• S-Video Audio/Video Selector Switch
• Quick Setup Guide
VIDEO
AV1
AV2
AV3
AV4 INPUT 1 L AUDIO R
Setting up your selector switch
INPUT 1 and INPUT 4 can be used for composite video devices only.
INPUT 2 and INPUT 3 can be used for either S-Video or composite video devices.
The jacks on your selector switch are color-coded. Most video and audio cables are also color-coded. Plug connectors into jacks with
matching colors.
AUDIO VIDEO
AUDIO VIDEO
L
AUDIO VIDEO
AUDIO VIDEO
AUDIO VIDEO
L
L
L
L
R
Note: Cables are not included.
To connect a video device to your selector switch:
R
R
R
R
S-VIDEO
INPUT 2
S-VIDEO
OUTPUT 2
S-VIDEO
OUTPUT 1
S-VIDEO
INPUT 3
1
Plug an S-Video cable into the S-VIDEO jack on INPUT 2 or INPUT 3 on your selector switch. Plug the other end of the cable into the S-VIDEO
INPUT 4
OUT jack on the S-Video device.
OR
Plug the yellow (video) connector on an AV cable into the VIDEO jack on INPUT 1, INPUT 2, INPUT3, or INPUT 4 on your selector switch. Plug
the yellow connector on the other end of the AV cable into the VIDEO OUT jack on the composite video device.
Plug an analog (RCA) audio cable into the R (red) and L (white) audio jacks next to the S-VIDEO jack on your selector switch. Plug the other ends
of the cable into the R and L AUDIO OUT jacks on the S-Video device.
Connect a TV or home theater receiver
Connect a composite video device Connect S-Video or composite video devices
2
OR
Plug the red and white connectors on the AV cable into the R (red) and L (white) audio jacks next to the VIDEO jack on your selector switch.
Plug the other ends of the cable into the R and L AUDIO OUT jacks on the composite video device.
To connect a TV or home theater receiver to your selector switch:
1
Plug an S-Video cable into the S-VIDEO jack on OUTPUT 1 or OUTPUT 2 on the back of your selector switch. Plug the other end of the cable into
the S-VIDEO IN jack on the TV or home theater receiver.
OR
One-year limited warranty
Plug the yellow (video) connector on an AV cable into the VIDEO jack on OUTPUT 1 or OUTPUT 2 on the back of your selector switch. Plug the
yellow connector on the other end of the cable into the VIDEO IN jack on the TV or home theater receiver.
Plug an analog (RCA) audio cable into the R (red) and L (white) audio jacks next to the S-VIDEO jack on the back of your selector switch. Plug
the other ends of the cable into the R and L AUDIO OUT jacks on the S-Video device.
OR
Contact Dynex:
2
For customer service call 1-800-305-2204
© 2011 BBY Solutions, Inc. All Rights Reserved.
DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners.
Plug the red and white connectors on the AV cable into the R (red) and L (white) audio jacks next to the VIDEO jack on your selector switch.
Plug the other ends of the cable into the R and L AUDIO OUT jacks on the composite video device.
QUICK SETUP GUIDE
ENGLISH 11-0308
|