GE Monogram Dishwasher ZBD6800KBB User Manual

ZBD6880KSS

ZBD6800KWW/BB – GE Monogram Fully Integrated Built-In Dishwasher

Dimensions and Specifications (in inches)

• The dishwasher must be installed so that the drain hose is no

more than 10 feet in length for proper drainage.

This Wall Area Must be

Free of Pipes or Wires

• Water and power supply should enter in the shaded area.

• Electrical and water connections are at the right front of the

dishwasher. The hot water line should extend forward 30" to

40" from the rear wall. The electrical must extend forward at

least 24" to reach the junction box.

24"

min.

34" to 35"

Floor to

Underside of

Countertop

• To prevent siphoning, an air gap must be used when the

waste tee or disposer connection is less than 18" above

the floor.

24"

Plumbing and Electric Service

Must Enter Inside This Area

34" - 35"*

24"

Electrical Requirements

The dishwasher must be supplied with 120V, 60Hz, and connected

to an individual properly grounded branch circuit protected by a

15- or 20-amp circuit breaker or time-delay fuse.

Listed by

Underwriters

Laboratories

As an ENERGY STAR^®

partner, GE has determined

that this product meets the

ENERGY STAR guidelines

for energy efficiency.

For answers to your Monogram^®GE Profile^™or

GE^®appliance questions, visit our website at

GEAppliances.com or call GE Answer Center^®

service, 800.626.2000.

Specification Revised 8/04

150041